Summary of information:
You may think that fiber laser cutting machine belongs to the category of cutting machine. If imported laser is used, the cutting range should be very wide, and the effect should be more ideal than other methods. In fact, there are also special types of cutting machines
You might think, Fiber laser cutting machine It belongs to the category of cutting machine. If imported laser is used, the cutting range should be very wide, and the effect should be more ideal than other methods. In fact, there are special types of cutting machines. Each kind of cutting machine has its advantages and disadvantages. Broll will make a detailed analysis.
First of all, the fiber laser cutting machine belongs to the processing category of metal laser cutting machine, which is undoubtedly. However, the fiber laser cutting machine mainly cuts metal. At present, the fiber laser cutting machine on the market can not cut all kinds of clothing cloth, leather, ore and other non-metallic materials. The reason is very simple. The wavelength range of the fiber laser cutting machine is not within the absorption range of the above-mentioned materials, or the absorption is not suitable, so it can not achieve the ideal cutting effect The advantage of metal cutting is not very obvious, of course, we can not rule out the possibility of developing this demand in the future.
secondly, Fiber laser cutting machine It is not recommended to cut rare metal materials such as aluminum and copper plate for a long time, because these materials are high reflective materials (Note: high reflection has little to do with the smoothness of the cutting surface of the plate, mainly because the wavelength of the laser is not within the ideal absorption range of these materials, the absorption effect is not good, most of the energy is reflected back, and it is easy to damage the protective lens in front of the laser head) If the effect is not good, it will damage the laser of the laser cutting machine, increase the consumption of consumables and increase the cutting cost.
Finally, the fiber laser cutting machine, according to its power size, the cutting thickness also changes. The higher the power, the greater the cutting thickness, the thinner the metal material, the faster the cutting speed. The advantages of fiber laser cutting machine for thin plate cutting are very obvious.
Therefore, if your product material is sheet metal material, you can consider choosing optical fiber laser cutting machine, which has higher efficiency and lower cost. If you have any doubt, you can consult Broll customer service support. Broll is a professional fiber laser cutting machine manufacturer. There are more than ten kinds of cutting machine products in four series, including closed type, open type, desktop type and gantry type, which can also provide professional services Cutting machine customized service.